STATUS_GRAPHICS_OPM_OUTPUT_DOES_NOT_SUPPORT_ACP 0XC01E0514
This error means your graphics output doesn't support analog copy protection. It usually pops up when playing protected video content on a non-compliant display or driver setup.
Quick answer
Update your graphics driver to the latest version from the manufacturer's site, then check your display cable is HDMI 1.4 or higher. If it still fails, disable the protected output feature in your media player or switch to a different display.
What's going on here
This error code 0XC01E0514 is part of the Output Protection Manager (OPM) in Windows. It means your graphics adapter or display can't handle the analog copy protection (ACP) request for protected content. This usually happens when you're trying to play Blu-ray movies, stream premium video services, or run software with DRM restrictions. The error emerges because your graphics driver or monitor doesn't support the required protection level — often because you're using an older monitor, a VGA or DVI cable, or a graphics driver from 2018 or earlier. I've seen this on Windows 10 and 11 systems with legacy monitors that lack HDCP (High-bandwidth Digital Content Protection) support.
Fix steps
- Update your graphics driver — Go to the manufacturer's website (NVIDIA, AMD, or Intel). Download the latest driver for your specific model and Windows version. Don't use Windows Update for this — it often gives you older, generic drivers. After installing, reboot your computer. You should see a clean boot without the error.
- Check your display cable — If you're using VGA, DVI, or older HDMI cables, swap to an HDMI 1.4 or DisplayPort cable. Many copy protection schemes require HDMI with HDCP. After swapping, test the same content again.
- Disable protected output in your media player — Open your media player (like VLC, MPC-HC, or PowerDVD). Go to settings or preferences. Look for a section called “Output” or “Video”. Find an option for “Enable protected output” or “Use Hardware Decoding” and turn it off. Apply the change, then restart the player. This bypasses the copy protection check entirely.
- Switch to a different display — If you have a second monitor or TV that supports HDCP (any modern TV from 2010+ should), try connecting that. The error should disappear because that display will respond to ACP requests correctly.
- Roll back a recent driver update — If the error started after a driver update, go to Device Manager, find your graphics card under “Display adapters”, right-click, choose “Properties” > “Driver” tab > “Roll Back Driver”. Confirm and reboot.
Alternative fixes if the main ones fail
Disable HDCP in the registry — This is a workaround that turns off the protection check system-wide. Open Registry Editor (regedit), navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\GraphicsDrivers. Create a new DWORD (32-bit) named PlatformSupport and set its value to 1. Reboot. Warning: This can cause video playback issues in some apps.
Switch to software rendering — In your media player, force software decoding (disable hardware acceleration). This removes the dependency on OPM. In VLC: Tools > Preferences > Input/Codecs > Hardware-accelerated decoding > set to “Disable”.
Reinstall the graphics driver cleanly — Use Display Driver Uninstaller (DDU) in Safe Mode to remove all traces of the old driver, then install the latest one fresh. This fixes corrupted driver components that cause ACP handshake failures.
Prevention tip
Keep your graphics driver updated at least once a year, and always use a digital cable (HDMI or DisplayPort) for video playback. If you regularly play protected content, buy a monitor that explicitly states “HDCP 2.2 compatible” in the specs. Skip cheap HDMI cables — they often fail protection handshakes.
Was this solution helpful?